Modifiche al passo #3
Righe Passo
| + | [* black] Keep track of which sides the hinges came from by marking them on the hinges, and on the metal plate of the keyboard. |
|---|---|
| + | [* black] After removal, you will see a nut at the end of the hinge pivot pin. The hinge has a detent position when the cover is fully open and fully closed. This hinge is too tight. Loosen the nut until the pin is flush with the head of the nut. Test the open/close action. |
Immagine 1
Nessuna immagine precedente.
Aggiunto
Immagine 2
Nessuna immagine precedente.
Aggiunto