Salta al contenuto principale

Modifiche al passo #2

Modifica di tgarrity

Modifica approvata da tgarrity

Prima di
Dopo il
Invariato

Righe Passo

+[* black] After you get the back off it will look like this. The black plastic strip in the middle must be removed. There are tabs on each end, and it snaps in. To remove, gently pry open with a small screwdriver. Now you can see the two hinges, and four screws for each hinge.
+[* black] You need a very small screwdriver to remove the screws, and I believe they were cemented in. About half of the screws came out easily. I able to remove the others by heating them up with a soldering iron, ***very carefully***.

Immagine 1

Nessuna immagine precedente.

Aggiunto