Modifiche al passo #4
Modifica di Jim —
- Prima di
- Dopo il
- Invariato
Righe Passo
| + | [* red] Remove the power button circuit board from the support frame by pinching the left side, pulling forward and to the left simultaneously. |
|---|---|
| + | [* icon_caution] Be careful not to pull to hard on the cable connecting the power button circuit board to the logic board |
| + | [* blue] Push up on the tab holding the secondary control circuit board and pull it forward to remove it. |
| + | [* icon_caution] Be careful not to pull to hard on the cable connecting the secondary control circuit board to the logic board |
Immagine 1
Nessuna immagine precedente.
Aggiunto
Immagine 2
Nessuna immagine precedente.
Aggiunto