Modifiche al passo #1
Modifica di Chris Phelan —
Modifica approvata da Ryan Lutz
- Prima di
- Dopo il
- Invariato
Righe Passo
| - | [* black] Turn the camera with the pop up flash light 90 degrees until you can see the screws. |
|---|---|
| - | [* red] Remove the two screws being cautious not to strip or ruin the screws, with a # Phillips 00 screwdriver |
| - | [* black] Flip the flasher up so you can access the other two screws for removal |
| - | [* icon_note] Be careful no to loose any screws as you will need them to reassemble the camera. |
| + | [* black] Turn the lens/flash assembly 90 degrees, until you can see two screws. |
| + | [* red] Remove the two Phillips #00 screws, being careful not to strip or ruin the screws, with the appropriate screwdriver (Phillips #00) |
| + | [* icon_caution] Be careful you don't strip or ruin the screws, you'll need them to re-assemble the camera properly! |
| + | [* red] Flip the flash up so you can access the other two screws. Remove them too. |
| + | [* icon_note] Be careful not to lose any screws as you will need them to reassemble the camera. |