Modifiche al passo #6
Modifica di Brett Hartt —
- Prima di
- Dopo il
- Invariato
Righe Passo
[* black] Using a ***11 mm*** wrench in your left hand, open the bleed valve on the front brake cylinder. | |
[* black] The built up pressure in the lines will force some of the brake fluid out of the lines. | |
[* black] Continue to force more brake fluid out of the brake lines by depressing the front brake lever with your right hand. | |
+ | [* icon_caution] While bleeding the brakes, focus on the bleeder hose. If you see an air bubble traveling up the bleed hose, close the bleed valve immediately, and begin the process again. |
[* black] Once the brake lever is completely depressed, quickly close the bleed valve, making sure that no air bubbles enter into the brake lines. | |
- | [* icon_caution] While bleeding the brakes, focus on the bleeder hose. If you see an air bubble traveling up the bleed hose, close the bleed valve immediately, and begin the process again. |