Modifiche al passo #1
Righe Passo
| + | [* black] Using a plastic opening tool carefully pry the device apart. Make your way around the entire perimeter of the device and carefully place the two panels next to each other. |
|---|---|
| + | [* icon_caution] After the panels are separated watch out for the speaker on the rear panel as it's wire is rather short. |
| + | [* icon_note] When separating the panels keep an eye out for the power button and volume rocker as they can be dislodged. |
Immagine 1
Nessuna immagine precedente.
Aggiunto
Immagine 2
Nessuna immagine precedente.
Aggiunto
Immagine 3
Nessuna immagine precedente.
Aggiunto