Modifiche al passo #2
Righe Passo
| [* black] After removing the screws, use a metal spatula to push the back cover out. | |
| - | [* icon_caution] The metal spatula can damage the plastic housing so take care when applying any pressure to it. |
| + | [* icon_caution] The metal spatula can damage the plastic housing so take care when applying any pressure to it. Use a plastic spudger to reduce the risk of damage to the housing. |
| [* black] Remove the back housing of the camera by lifting it directly up. | |
| - | [* icon_note] The back cover may be slightly tight, therefore more force may be needed to lift it up. |
| + | [* icon_note] The back cover may be slightly tight, therefore more force may be needed to lift it up. |