Modifiche al passo #1
Modifica di Anthasia Williams —
Modifica approvata da Anthasia Williams
- Prima di
- Dopo il
- Invariato
Righe Passo
| + | [* icon_note] Before starting the disassemble, make sure the device is powered off. |
|---|---|
| [* black] To remove the battery, you first must flip the device on its front to display the back of the device. | |
| [* black] At this point you will notice a total of four screws at each corner of the device. | |
| [* black] Now take the PH000 drill bit from the iFixit toolkit and unscrew all four screws. | |
| [* black] Don't forget to place the screws aside in a safe location, perhaps use a magnetic board to store them. You will need the screws to put the device back together. |