Storia Nikon COOLPIX P600 Tripod Mount Replacement Passo n. 8

-	[* ~~black~~] ~~With a pair of~~ needle nose tweezers~~, very~~ gently lift the black/grey latch towards the wire ribbon (the ~~plastic~~ latch rotates upward to release and snaps down to lock~~, be very careful not to break this latch as it cannot be replaced~~).
-	[* ~~black~~] ~~After opening black/grey latch proceed~~ to ~~gently remove wire ribbon with needle nose tweezers~~.
-	[* black] ~~Pull the wire~~ ribbon ~~towards the back end of the camera~~.
-	[* black] ~~Repeat~~ the ~~process with~~ the ~~larger wire ribbon~~.
+	[* red] Use needle nose tweezers to gently lift the black/grey latch towards the wire ribbon (the latch rotates upward to release and snaps down to lock).
+	[* icon_caution] Be careful not to break the latch. It cannot be replaced.
+	[* black] Use tweezers to gently remove ribbon-wires.
+	[* black] Pull the ribbon-wires towards the back-end of the camera.