Storia Andis Master Clippers Motor/Coil Assembly Replacement Passo n. 4

	[* yellow] Next, using the wire cutters, cut the {Positive & Negative} wires, leading from the *Coil Assembly* to the *Attached power cord*, approximately half way between the two ends of both wires.
-	[* icon_note] Note: Black being {Negative} goes with the Black wire, Red being {Positive} goes red, but in this case, with the white cord (all depending on how the manufacturer ships it) extending from the *Attached power cord*.
+	[* icon_note] Note: Black being {Negative} goes with the Black wire, Red being {Positive} goes with red, but in this case, with the white cord (all depending on how the manufacturer ships it) extending from the *Attached power cord*.
	[* red] Strip the ends of each wire with the wire strippers approximately 1-2cm down to reveal enough wire to twist back together with new motor's wires .
	[* icon_reminder] Reminder: Be sure to keep track of the corresponding wires and their locations to match when the new motor is inserted.

	[* yellow] Next, using the wire cutters, cut the {Positive & Negative} wires, leading from the *Coil Assembly* to the *Attached power cord*, approximately half way between the two ends of both wires.
-	[* icon_note] Note: Black being {Negative} goes with the Black wire, Red being {Positive} goes red, but in this case, with the white cord (all depending on how the manufacturer ships it) extending from the *Attached power cord*.
+	[* icon_note] Note: Black being {Negative} goes with the Black wire, Red being {Positive} goes with red, but in this case, with the white cord (all depending on how the manufacturer ships it) extending from the *Attached power cord*.
	[* red] Strip the ends of each wire with the wire strippers approximately 1-2cm down to reveal enough wire to twist back together with new motor's wires .
	[* icon_reminder] Reminder: Be sure to keep track of the corresponding wires and their locations to match when the new motor is inserted.