Modifiche al passo #18
Modifica di Luis Gomez —
- Prima di
- Dopo il
- Invariato
Righe Passo
| + | [* black] Removing motherboard from bottom assembly. I show a picture of the top palm assembly for precaution again. |
|---|---|
| + | [* black] Disconnect the two ribbon cables found on opposite corners of the motherboard. |
| + | [* black] The cable on the bottom left should have two pressure pins, if not just pull the cable out. |
| + | [* black] The cable on the top right will have two pressure pins for locking, release them and pull the cable out using the hard film. |
| + | [* black] Remove 8 screws from the motherboard using the #0 Philips Screwdriver. |
| + | [* black] 4 black screws are found along the edges of the motherboard. |
| + | [* black] 2 Metalic screws are found underneath the ribbon cable on the bottom left. Remove them. The last 2 screws are on the hard drive cage on the bottom right. |
| + | [* black] Enjoy the sight. You are done! There are a few other parts but those should be easy to remove from here. |
Immagine 1
Nessuna immagine precedente.
Aggiunto
Immagine 2
Nessuna immagine precedente.
Aggiunto
Immagine 3
Nessuna immagine precedente.
Aggiunto