Modifiche al passo #3
Modifica di Scott Kaufman —
Modifica approvata da Scott Kaufman
- Prima di
- Dopo il
- Invariato
Righe Passo
| + | [* black] To tighten the cable, place the derailleur in the 1st gear position. This position requires the least amount of tension on the cable. |
|---|---|
| + | [* black] Loosen the 6mm hex nut using an Allen wrench just enough to allow the cable to come free. |
| + | [* black] Pull the cable using your hands as tight as you can. Replace the cable under the screw and tighten the screw by turning it clockwise. |