Modifiche al passo #1
Modifica di Scott Kaufman —
Modifica approvata da Scott Kaufman
- Prima di
- Dopo il
- Invariato
Righe Passo
| - | [* red] Once you have the tire removed from the rim, place the rim on the truing stand and tighten the stand on the axle to make sure the rim is secured on the stand. |
|---|---|
| + | [* red] Once you have the tire removed from the rim, place the rim on the truing stand and tighten the stand on the axle using the knob on the side of the stand to make sure the rim is secured on the stand. |
| [* orange] Raise the calipers on the stand so they are the same height as the rim. You can adjust the height of the calipers using knob on the base of the stand. |