Salta al contenuto principale

Modifiche al passo #4

Modifica di Kristen Gismondi

Modifica approvata da Kristen Gismondi

Prima di
Dopo il
Invariato

Righe Passo

-[* black] Open the typewriter lid and push the carriage away to expose the two #8 Phillips head screws holding the case to the chassis.
-[* black] Remove the 19mm #8 Phillips head screws using a #2 Phillips head screwdriver.
+[* black] Open the typewriter lid and push the carriage away to expose the two screws holding the case to the chassis.
+[* black] Remove the two 19 mm screws using a Phillips #2 screwdriver.