/
Il mio banco da lavoro

Ottieni un rapido accesso alle guide, ai componenti e alle risposte per i tuoi dispositivi

DE
Deutsch
ES
Español
IT
Italiano
PT
Português
TR
Türkçe
JP
日本語
EN
English
FR
Français
NL
Nederlands
RU
Pусский
ZH
中文
KO
한국어
Unisciti
Accedi

Modifiche al passo #4

Modifica di James Loy —

In attesa di approvazione

Prima di
Dopo il
Invariato

Righe Passo

-[* blue] Locate the small blue connector on the back side of the Motherboard and next to the LCD display.
-[* black] Use Spudger to lift up the top of the blue connector piece. Slide out the ribbon (the blue connection piece is attached to the Motherboard).
-[* black] Once the ribbon is removed the LCD can be rotated away from its initial position to reveal more screws underneath.
-[* icon_caution] Do not pull LCD display out or rotate past 90 degrees away from its initial postion, or else you will damage the remaining ribbon that holds the LCD in place.
+[* blue] Locate the small blue connector on the back side of the motherboard and next to the LCD screen.
+[* black] Use Spudger to lift up the top of the blue ZIF connector piece. Slide out the ribbon (the blue ZIF connector remains attached to the motherboard).
+[* black] Once the ribbon is removed the LCD screen can be rotated away from its initial position to reveal more screws underneath.
+[* icon_caution] Do not pull LCD screen out or rotate past 90 degrees away from its initial position, or else you will damage the remaining ribbon that holds the LCD sceen in place.