Modifiche al passo #3
Modifica di Jonathan Fish —
- Prima di
- Dopo il
- Invariato
Righe Passo
| - | [* black] Shift the rear derailleur into the lowest largest) gear. |
|---|---|
| - | [* black] The adjustment screw that corresponds to the largest gear (low gear) is labeled L. |
| - | [* red] Use the adjustment screw to align the guide sprocket on the derailleur with the largest gear on the cassette. |
| + | [* black] Shift the rear derailleur into the lowest (largest) gear. |
| + | [* red] Align the rear guide sprocket of the derailleur with the lowest (largest) gear, by tightening or loosening the screw labeled "L". |
| [* yellow] The second picture is of a misaligned derailleur. | |
| + | [* icon_note] This alignment sets the maximum inward distance that the derailleur can move the chain. Without setting this boundary, the derailleur could shift the bike chain off of the gear and onto the axle. This boundary setting is referred to as the low end adjustment stop. |