Modifiche al passo #4
Modifica di Travis Tonder —
- Prima di
- Dopo il
- Invariato
Righe Passo
| [* black] Now it's time to attach the cable to the derailleur | |
| [* red] Make sure the shifter is in its highest number gear, which corresponds to the default position of the derailleur. This will make sure the cable is let out as far as possible | |
| - | [* black] |
| - | [* black] |
| + | [* black] Slide the cable through the barrel adjuster screw until the cable housing bottoms out. |
| + | [* black] Pull the slack out of the cable while clamping it down with the nut that is attached to the derailleur. |
| [* black] Your derailleur is now in rough adjustment. |