Modifiche al passo #7
Modifica di Kristen Gismondi —
Modifica approvata da Kristen Gismondi
- Prima di
- Dopo il
- Invariato
Righe Passo
| [* red] Remove the 3 mm Phillips head screw that is between the circuit boards. | |
| - | [* icon_reminder] |
| + | [* icon_reminder] The other screw was the 4 mm screw that is between the circuit boards was taken off during step five of this guide. |
| [* orange] Remove the next three 3.5 mm Phillips head screws that are on the button circuit board. |