Modifiche al passo #4
Modifica di Tim Spellings —
Modifica approvata da Tim Spellings
- Prima di
- Dopo il
- Invariato
Righe Passo
| [* icon_reminder] Line up the pedal with its socket and begin to turn it in the correct tightening direction that was specified at the beginning of the guide. | |
| [* icon_note] Placement of the wrenches for tightening can be found in the picture and are consistent with the directions from step 2. | |
| [* red] This is the regular wrench holding on to the pedal's securing hex-nut. | |
| - | [* |
| + | [* yellow] This is the Allen wrench in the bolt socket. |
| [* black] Once the pedal is partially secured from the initial rotations, use your wrench to continue tightening. | |
| [* icon_reminder] Each pedal has different directions for tightening which were noted previously in step 1. | |
| [* black] Once resistance is felt, you will want to turn the pedal about 1/8 of a rotation more for proper tightness. | |
| [* icon_caution] Do not crank on the wrench to tighten the pedal further. This can lead to a stuck pedal in the future. |