Modifiche al passo #4
Modifica di Walter Galan —
- Prima di
- Dopo il
- Invariato
Righe Passo
| + | [* black] Use a heat gun to soften the adhesive under the black strip along the right side of the front glass panel. |
|---|---|
| + | [* black] Attach a suction cup along the right side of the front glass panel. |
| + | [* black] Pull up on the glass panel while you use the flat end of a spudger to separate it from the rest of the display assembly. |
| + | [* black] Continue working along the right edge of the front display glass until it is separated from the display. |
| + | [* icon_note] It may be helpful to use a guitar pick or another thin plastic object to keep the upper right corner of the front glass panel from sticking back down to the display assembly. |
Immagine 1
Nessuna immagine precedente.
Aggiunto
Immagine 2
Nessuna immagine precedente.
Aggiunto