Storia JD Razor 2000 Front Wheel Replacement Passo n. 1

-	[title] Removing the ~~screw~~
-	[* ~~black~~] Orient the scooter so that the front wheel is facing you. Observe the right and left side of the wheel. Remember which is which throughout the guide.
-	[* ~~black~~] Using an Allen wrench, unscrew the screw slowly from the right side while applying a constant pressure with your hand on the left side of the screw.
-	[* ~~blue~~] If the left side of the screw turns while you unscrew the right side, you will need to use a second Allen wrench to prevent it from moving
-	[* ~~blue~~] If the screw does not move at all, or moves very little, try applying a lubricant on as much of the screw as possible and try again in 5 minutes.
-	[* ~~black~~] Carefully pull apart the screws from the left and right side of the wheel.
+	[title] Removing the Screw
+	[* red] Orient the scooter so that the front wheel is facing you. Observe the right and left side of the wheel. Remember which is which throughout the guide.
+	[* orange] Using an Allen wrench, unscrew the screw slowly from the right side while applying a constant pressure with your hand on the left side of the screw.
+	[* icon_note] If the left side of the screw turns while you unscrew the right side, you will need to use a second Allen wrench to prevent it from moving
+	[* icon_note] If the screw does not move at all, or moves very little, try applying a lubricant on as much of the screw as possible and try again in 5 minutes.
+	[* yellow] Carefully pull apart the screws from the left and right side of the wheel.