Modifiche al passo #2
Modifica di Matthew Jordan —
Modifica approvata da Evan Noronha
- Prima di
- Dopo il
- Invariato
Righe Passo
| [* black] Once the three screws are removed, the device is ready for disassembly. | |
| - | [* red] |
| + | [* red] Push up on the rear flap while holding down on the rest of the body. This will open a small gap. |
| [* orange] Insert the plastic opening tool in the gap and begin prying on the corner. | |
| - | [* yellow] Continue to |
| + | [* yellow] Continue to pry around the body of the case. Separate both sides of the case with this method. |