Modifiche al passo #6
Modifica di Loren Sunding —
Modifica approvata da Loren Sunding
- Prima di
- Dopo il
- Invariato
Righe Passo
| - | [* black] Use a new razor blade or a commercial wax scraper to remove wax from the board. Tilt the wax remover toward the direction of travel at 45°. Pull the wax remover and use long smooth strokes |
|---|---|
| + | [* black] Use a new razor blade or a commercial wax scraper to remove wax from the board. Tilt the wax remover toward the direction of travel at 45°. Pull the wax remover and use long smooth strokes from tip to tail. |
| [* icon_caution] Be careful! The blade is sharp and may cause cuts if misused. | |
| [* icon_caution] Be careful not to bevel the scraper on edge and put a gouge in your board. | |
| - | [* black] Continue scraping until all |
| + | [* black] Continue scraping until all excess wax is removed. |