Modifiche al passo #2
Modifica di Yuanwei Chen —
Modifica approvata da Yuanwei Chen
- Prima di
- Dopo il
- Invariato
Righe Passo
| + | [* black] When the cover is removed, you will either find that there are already batteries inserted into the battery compartment, or that some or all batteries are missing. |
|---|---|
| + | [* black] If your device has no batteries in the compartment, skip to the next step. Note: This device does not come with batteries. However, if your device does have batteries inserted, continue with this step for instructions on how to remove them. |
| + | [* black] Each battery section of the compartment has a coil part(circled in red) on one end, and a flat part(circled in blue) on the opposite end. These ends alternate between each section. To easily pop out a battery, use your thumb to push the battery from the flat(blue) side down toward the coil(red) and pull the battery outward. |
| + | [* black] Repeat for all inserted batteries. Continue to the next step only after all the batteries have been removed, and you have an empty compartment. |
Immagine 1
Nessuna immagine precedente.
Aggiunto
Immagine 2
Nessuna immagine precedente.
Aggiunto
Immagine 3
Nessuna immagine precedente.
Aggiunto