Modifiche al passo #1
Righe Passo
| [* black] Flip the skateboard back over. | |
| - | [* red] Remove the 6 bolts indicated on the top side of the skateboard with a 3mm allen wrench. |
| - | [* orange] While holding the nut from the underside of the skateboard remove the 4 |
| + | [* red] Remove the 6 22mm bolts indicated on the top side of the skateboard with a 3mm allen wrench. |
| + | [* orange] While holding the nut from the underside of the skateboard remove the 4 32mm bolts with the 3mm allen wrench. |
| [* black] After removing these bolts, you can remove the trucks and control module from the board. |