/
Il mio banco da lavoro

Ottieni un rapido accesso alle guide, ai componenti e alle risposte per i tuoi dispositivi

DE
Deutsch
ES
Español
IT
Italiano
PT
Português
TR
Türkçe
JP
日本語
EN
English
FR
Français
NL
Nederlands
RU
Pусский
ZH
中文
KO
한국어
Unisciti
Accedi

Modifiche al passo #4

Modifica di Spencer Pennington —

Modifica approvata da Spencer Pennington

Prima di
Dopo il
Invariato

Righe Passo

[title] Remove the screws from the metal track
-[* icon_note] Inside the Cricut are [link|https://guide-images.cdn.ifixit.com/igi/KXtG2binGWdCaJlk.full|seven screws securing the top cover to the metal track that holds the Double Tool Holder|new_window=true]. You can reach these screws by [link|https://guide-images.cdn.ifixit.com/igi/ur2RxlpgSNucZ2PR.full|putting a screwdriver bit in a socket wrench|new_window=true]. If you are using iFixit bits, the smaller bits work with a 4‑mm socket and the larger bits work with a 1/4‑inch socket.
-[* red] Use a Phillips screwdriver to remove the seven 9.8 mm‑long screws securing the top cover to the metal track.
+[* icon_note] Inside the Cricut are seven [link|https://guide-images.cdn.ifixit.com/igi/KXtG2binGWdCaJlk.full|screws|new_window=true] securing the top cover to the metal track that holds the tool holder. You can reach these screws by [link|https://guide-images.cdn.ifixit.com/igi/ur2RxlpgSNucZ2PR.full|putting a screwdriver bit in a ratcheting socket wrench|new_window=true]. If you are using iFixit bits, the smaller bits work with a 4‑mm socket and the larger bits work with a 1/4‑inch socket.
+[* red] Remove the seven 9.8 mm‑long Phillips screws securing the top cover to the metal track.