Modifiche al passo #1
Righe Passo
| + | [* black] Welcome to this guide on how to disassemble an alienware, below, I will describe the tools, you also can see the pictures |
|---|---|
| + | [* black] This teardown is valid for all M11x, including R1 & R2, and mine(R3) |
| + | [* blue] 1x Phillips #1 and #00 Screwdriver |
| + | [* blue] 1x Flathead Screwdriver |
| + | [* blue] 1x Small Needle Nose Pliers or Tweezers |
| + | [* blue] 1x Thermal Paste and Some Finger Stalls or in my case small water balloons (to spread thermal paste without getting dirty) |
| + | [* blue] 1x Anti-Static Mat |
| + | [* icon_reminder] It's recommended to read about Static electricity and how it can damage electronic components |
Immagine 1
Nessuna immagine precedente.
Aggiunto