Modifiche al passo #2
Modifica di Lyndon Kov —
Modifica approvata da Lyndon Kov
- Prima di
- Dopo il
- Invariato
Righe Passo
| [* black] Detach the PCB with the microphones from the plastic. | |
| - | [* red] Remove the solder holding the microphones to the PCB. |
| + | [* red] Using a soldering iron, desolder the microphones from the PCB. |
| + | [* icon_caution] Be careful! The soldering iron is hot. Do not burn yourself or the device. It should not be applied to the device too long to avoid damaging any of the device components. |
| [* icon_note] Follow the [guide|750|IFixit soldering instructions|new_window=true] for tips on desoldering to avoid burning yourself or damaging the device. |