Modifiche al passo #4
Modifica di Kenneth Williams —
Modifica approvata da Kenneth Williams
- Prima di
- Dopo il
- Invariato
Righe Passo
| [* black] Attach a 13mm socket to a ratchet extension then attach the extension to a drive ratchet. | |
| + | [* black] Loosen the 13mm bolt from the negative terminal of the battery. |
| + | [* icon_note] You do not need to remove the nut from the terminal bolt completely. The terminal should slide off the post once the nut is loose. |
| [* icon_caution] Be sure to keep your ratchet or any other metal items from touching both the positive and negative terminals while performing this task***. Connecting metal to both terminals creates a new path of electricity and could cause serious chemical, electrical, and flammable damage to your equipment and/or health.*** |