Modifiche al passo #3
Modifica di Sam Gustafson —
Modifica approvata da Sam Gustafson
- Prima di
- Dopo il
- Invariato
Righe Passo
| [title] Remove exp/ISO resistor | |
| [* red] Unscrew three #00 3.0 mm screws. | |
| [* orange] Remove exp/ISO resistor assembly. | |
| [* yellow] Remove exp. compensation coupling cam. | |
| [* green] There are two loose ball bearings that sit in these holes. Do not lose. | |
| + | [* icon_note] ''Reassembly Note:'' Check the exposure compensation flag in the viewfinder. It should not be visible when dial is set to 1x and pop into view when set to any other value. |