Modifiche al passo #2
Modifica di Peyton Stewart —
Modifica approvata da Peyton Stewart
- Prima di
- Dopo il
- Invariato
Righe Passo
| - | [* black] Please note the first picture shows what the feet look like, the upper two feet are already removed. Next remove the 2 upper feet using a plastic removal tool. After this, remove the 2 screws under the feet. These are the final screws needed to be removed to remove the back panel. In total, you should remove 8 screws between Steps 1 and 2. |
|---|---|
| + | [* black] Please note the first picture shows what the feet look like, the upper two feet are already removed. Next remove the 2 upper feet using a plastic removal tool if they are still in place. After this, remove the 2 Torx T8M2.0x9.0 screws under the feet. |
| + | [* black] These are the final screws needed to be removed to remove the back panel. In total, you should remove 8 screws between Steps 1 and 2. |