Modifiche al passo #8
Modifica di Jeanette Lopez —
Modifica approvata da Jeanette Lopez
- Prima di
- Dopo il
- Invariato
Righe Passo
| - | [* red] Use a Phillips #1 screwdriver to remove the 6-mm screw near the hard drive. |
|---|---|
| + | [* icon_caution] Be careful not to allow any hardware into the CPU fan and duct which are located in the upper left. |
| + | [* red] Rremove the 6-mm screw near the hard drive using a Phillips #1 screwdriver. |
| [* icon_note] This is not a captive screw and, once loosened, will be free to move about the assembly. | |
| - | [* icon_caution] Be careful not to allow either fastener into the CPU fan and duct (located in the upper left). |