Modifiche al passo #5
Modifica di James McNeil —
Modifica approvata da James McNeil
- Prima di
- Dopo il
- Invariato
Righe Passo
| - | [* black] Locate the gap between the upper plastic layer of the device. |
|---|---|
| - | [* black] Take your spudger tool and slowly push upwards |
| - | [* black] This will lift the plastic cover exposing the blower fan |
| + | [* black] Locate the retaining tab at the bottom of the module. |
| + | [* black] Use the spudger tool as a lever to release the plastic motor frame from the retaining tab. |
| + | [* black] With the tab released, pivot the plastic frame up and away from the control module. |
| + | [* icon_note] Note: There are three total retaining tabs. The two on either side of the motor frame will release when pivoting the frame upward. |
| + | [* icon_note] Note: The small hole in the frame provides an excellent point of contact to aid in removal. |