Modifiche al passo #6
Righe Passo
| - | [* red] Remove the three screws with a Phillips #00 screwdriver. |
|---|---|
| + | [* red] Remove the three 6mm screws with a Phillips #00 screwdriver. |
| [* icon_caution] When re-assembling your drone, be careful not to over tighten the screws. The drone body is made of soft plastic, doing so may strip the screws' housing and prevent them from holding. | |
| + | [* icon_note] Some of the screws may not completely remove from the black housing. A slight tap may jar them loose, but this is not necessary. |