Modifiche al passo #3
Righe Passo
| - | [* orange] Remove the three screws holding the propeller guard with a Phillips #00 screwdriver |
|---|---|
| + | [* orange] Remove the three 6mm screws holding the propeller guard with a Phillips #00 screwdriver |
| [* icon_caution] When re-assembling your drone, be careful not to over tighten the screws. The drone body is made of soft plastic, doing so may strip the screws' housing and prevent them from holding. | |
| [* icon_note] The drone motor may be magnetized, making it difficult to remove or install the screws. Using the tweezers to grip them is recommended. |