Salta al contenuto principale

Modifiche al passo #4

Modifica di Kristen Gismondi

Modifica approvata da Kristen Gismondi

Prima di
Dopo il
Invariato

Righe Passo

-[* red] Using a flat-head screw driver straighten up all three latches of metal cover.
+[* red] Using a spudger, straighten all three metal latches.
[* black] Hold both edges of the metal cover with your finger and pull upward to take it out from its position.
[* icon_caution] Metal cover edges are very sharp. Watch your finger when holding the metal cover.