Modifiche al passo #4
Modifica di Austin Blakely —
Modifica approvata da Austin Blakely
- Prima di
- Dopo il
- Invariato
Righe Passo
| [* red] Remove the spacer that sits between the bearings on the inside of the wheel. | |
| [* black] Pry out the other bearing. | |
| [* icon_note] We used our fingers. The tool can also be used, whichever you find easier. We recommend pushing it out from the inside. | |
| - | [* |
| + | [* icon_note] The last picture is all the parts that you should have at this point. |