Modifiche al passo #1
Modifica di Sarah Westberg —
Modifica approvata da Sarah Westberg
- Prima di
- Dopo il
- Invariato
Righe Passo
| - | [* black] Remove the 9mm |
|---|---|
| + | [* black] Remove the 9mm Torx screw with a T15 Torx screwdriver to release the SSD assembly. |
| [* black] Lift the assembly upwards to remove it. | |
| - | [* icon_caution] Be sure that the power is off and the A/C power cord has been disconnected before starting. Removing hardware while the power is on could damage the device or harm you. |
| - | [* icon_caution] Components of the device are subject to static damage. Work on a hard, grounded surface to prevent damage to the workstation. |