Modifiche al passo #7
Modifica di Joshua Simpson —
Modifica approvata da Joshua Simpson
- Prima di
- Dopo il
- Invariato
Righe Passo
| [* black] Put the trucks of the board back on by first inserting the screws back in from the top. | |
| [* black] Then fit the trucks to align with the screws and place nuts over area where the screws are overlapping. | |
| [* black] Tighten the nuts using the socket and the screws with the screwdriver. | |
| + | [* icon_note] 8x25mm Phillips Screws and 8x3/8 Nuts |