Modifiche al passo #6
Modifica di Arthur Shi —
Modifica approvata da Arthur Shi
- Prima di
- Dopo il
- Invariato
Righe Passo
| + | [title] Re-attach the motor |
|---|---|
| + | [* icon_reminder] ***Re-assembly note: ***To re-attach the motor: |
| + | [* black] Press the axle key into the notch on the engine axle. |
| + | [* black] Align the pump shaft with the keyed axle. You may have to rotate the pump to do so. |
| + | [* black] Slide the pump onto the axle until the coupling surfaces touch. |
| + | [* icon_note] If there is a significant gap between the pump and engine, pull the pump off, and re-set the axle key. |
Immagine 1
Nessuna immagine precedente.
Aggiunto