Modifiche al passo #8
Modifica di Ryan Dionne —
Modifica approvata da Ryan Dionne
- Prima di
- Dopo il
- Invariato
Righe Passo
| - | [* red] Adjust the |
|---|---|
| + | [* red] Adjust the two 1.5 mm flat head prism screws by slightly turning the driver. |
| [* icon_note] Note: Look through the binoculars after each turn, and if the vision is aligned, you can stop at this step. If adjusting these screws does not align the vision, proceed to Step 9. | |
| [* icon_caution] DO NOT tighten the prism screws too much, or you will crack the prism and permanently destroy it. Repairing or replacing the prism is beyond the scope of this guide. |