Modifiche al passo #1
Modifica di Brooke Mason —
Modifica approvata da Brooke Mason
- Prima di
- Dopo il
- Invariato
Righe Passo
| [title] Drill the holes into the enclosure. | |
| [* yellow] 1. Drill a hole in the top right corner 16.5 mm from the top and 30.3 mm from the side using a 13/16 inch drill bit. | |
| [* green] 2. Drill two holes in the side 30 mm from the short sides and 27 mm from the long side using a 1/2 inch drill bit. | |
| [* blue] 3. Screw in two waterproof cable gland connectors to the side holes. | |
| - | [* violet] Put in a button in the other hole. |
| + | [* violet] Put in a button in the rocker switch in the other hole. |