Modifiche al passo #1
Modifica di Isaac Van Baren —
Modifica approvata da Isaac Van Baren
- Prima di
- Dopo il
- Invariato
Righe Passo
| [* black] After placing the back panel to the side, locate the battery in the center of the control board. | |
| - | [* black] Remove the three 6-mm Phillips #0 screws and four 4-mm Phillips #0 screws. |
| + | [* red] Remove the three 6-mm Phillips #0 screws. |
| + | [* orange] Remove the four 4-mm Phillips #0 screws. |