Salta al contenuto principale

Modifiche al passo #1

Modifica in base a Austin Kohout-

Modifica approvata da Austin Kohout

Eliminato
Aggiunto
Invariato

Righe Passo

[* black] Pull out and rotate the quick release lever until the axle is loose.
[* black] Pull back on the derailleur on the left hand side. This wouldlessens the force required to remove the tension holding the rear wheel in placefrom its mount greatly.
[* black] PullLift the bike, and pull the wheel in a downward motion to remove the wheelfrom its mount.
[* icon_note] If thereIt is a replacementpossible that your wheel the bike maydoes not have a quick releaserelease tab. In which case you would need tothis case, use the correcta wrench size to loosen the axialretaining bolt. This wrench size varies between wheels.
[* black] Pull back on the derailleur on the left hand side. This wouldlessens the force required to remove the tension holding the rear wheel in placefrom its mount greatly.
[* black] PullLift the bike, and pull the wheel in a downward motion to remove the wheelfrom its mount.
[* icon_note] If thereIt is a replacementpossible that your wheel the bike maydoes not have a quick releaserelease tab. In which case you would need tothis case, use the correcta wrench size to loosen the axialretaining bolt. This wrench size varies between wheels.