Modifiche al passo #4
Modifica di matthew pennell —
Modifica approvata da matthew pennell
- Prima di
- Dopo il
- Invariato
Righe Passo
+ | [* black] Remove the locking pin |
---|---|
+ | [* black] Place your 17mm socket on the bolt side and the 1 inch side over the knut |
+ | [* icon_note] This is where the breaker bar would help as it could be very tight |
+ | [* black] Loosen the bolt to about half way |
+ | [* icon_caution] Do not take the bolt out or the knut off |
Immagine 1
Nessuna immagine precedente.
Aggiunto
Immagine 2
Nessuna immagine precedente.
Aggiunto
Immagine 3
Nessuna immagine precedente.
Aggiunto