Modifiche a questo Step
Modifica di Raghda Al-Hmeyrat —
Modifica approvata da Raghda Al-Hmeyrat
- Prima di
- Dopo il
- Invariato
Righe Passo
| + | [* black] Place the drone on its back, with the runners facing upward. |
|---|---|
| + | [* black] Using the size PH00 Phillips screwdriver head, unscrew the four 2mm screws that connect the runners and camera to the main drone body. |
| + | [* black] Pull the runners and camera away from the main drone body. |
| + | [* black] Use a spudger for extra leverage if the parts do not easily separate. |
| + | [* black] Be careful when separating the runners and camera away from the main drone body - the plastic is brittle and may snap. |