Modifiche al passo #5
Modifica di Victor Popov —
Modifica approvata da Victor Popov
- Prima di
- Dopo il
- Invariato
Righe Passo
| [* black] By hand you can now adjust the positioning of the stem and handlebar so that is in line with the front wheel of the bike. | |
| - | [* black] Tighten the two bolts |
| + | [* black] Tighten the two bolts; 1 and 2 with a 7/32" Allen Wrench . These clamp the stem to the steerer tube of the fork. |
| [* black] Make sure that after tightening bolt 2 you go back and make sure you check the tightness of bolt 1 again. Since the bolts are used to clamp, bolt 1 will usually not be tight enough after tightening bolt 2. |