Salta al contenuto principale

Modifiche al passo #5

Modifica in base a Luke VanBuskirk-

Modifica approvata da Luke VanBuskirk

Eliminato
Aggiunto
Invariato

Righe Passo

[* black] Lift the silver compartment to see where the wires are further connected.
[* black] Make sure that the terminals from the circuit to the amplifier are connected securely.
[* black] Check to see if there is loose wiring from the motherboard.
[* black] If there is loose or damaged wire, refer to {this link} for soldering wires to the amplifier or {this link} for replacing wires.

Immagine 1

Nessuna immagine precedente.

Aggiunto