Modifiche al passo #4
Modifica di Tabitha Howell —
Modifica approvata da Tabitha Howell
- Prima di
- Dopo il
- Invariato
Righe Passo
| [* red] Remove haptic motor at bottom left of the device. This will require a prying tool, as the motor is glued to the device. | |
| - | [* |
| - | [* |
| + | [* orange] Place new PCB unit in place of old PCB unit along with attached haptic motor unit. |
| + | [* yellow] Replace PCB cable connections, antenna connection, screws, plastic frame, battery and back cover. |