Modifiche al passo #4
Modifica di herf23f324g —
Modifica approvata da herf23f324g
- Prima di
- Dopo il
- Invariato
Righe Passo
| - | [* red] On the bottom, unscrew the four 15mm Phillips Head #2 screws, using the Phillips Head #2 screwdriver |
|---|---|
| - | [* black] Pry up at the location marked, and remove the plastic end cap |
| + | [* red] On the bottom, unscrew the four 15mm Phillips Head #2 screws, using the Phillips Head #2 screwdriver. |
| + | [* black] Pry up at the location marked, and remove the plastic end cap. |
| [* black] Repeat these steps on the top of the speaker. |